Home > Products > Gas analyzer
Portable purity oxygen analyzer

Portable purity oxygen analyzer

    Portable purity oxygen analyzer can be widely applied in the purity oxygen analysis in the industries like air-separation purity oxygen monitoring, melting industry, medical treatment, petrochemical industry and electronic power, etc.

Portable purity oxygen analyzer adopts the imported limiting current sensor as the measured unit, with a rapid response speed and long calibration cycle for features, etc. With the function of sensor protection, the instrument can be turned on under any circumstances without affecting the sensor's serving life. The built-in sensor temperature-compensation circuit could avoid the influence from temperature change on the measured accuracy.

Portable purity oxygen analyzer main features:

1. Power is supplied by large-capacity lithium battery, with the continuous measuring time more than 24 hoursand the standby time more than 168 hours;

2. Altitude measurement module can be expanded to avoid the influence from atmosphere pressure change on the measured accuracy;

3. With the functions of built-in compensation and sensor protection, the analyzer can be on power under 99.99%condition without affecting the sensor’s serving life;

4. Function of storing data automatically allows users to look through historic data at any time; 

5. The measured accuracy of the whole measurement range can be met by a random point calibrated, making the calibration simple and convenient;

6. Sampling pump built in (optional).

Portable purity oxygen analyzer technical parameters:

Test principle

 ion current (limiting current )

Display mode

128×64 matrix dot LCD

Test range

10.00% ~ 99.99% O2

Resolution

 0.01%

Accuracy

≤±1%FS

Repeatability

≤±1%

Response time

T90≤30S

Sample gas temperature

-10 ~ +50

Sampling mode

sample gas extraction or pass-in

Sample gas flow

300 ~ 600ml/min

Sample gas pressure(without pump)

0.05Mpa≤entrance displayed pressure≤0.35Mpasteady pressure environment

Sample gas pressure(with pump)

micro-positive pressure, micro-negative pressure or ordinary pressure

Background   gas

N2 and inactive gas

Appearance Size

155mm×260mm×340mm (H×W×D)

Serving life

type C5 yearstype D3 years(under normal use)

Gas circuit port

NPT 1/8 internal thread 

Charging source

AC100 ~ 240V 50/60Hz

Battery capacity

11.1V / 11AH

Install mode

portable mode

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved   

| Sitemap |       Technical Support: